1. Winnipeg Manitoba Provincial Nominee

We offer a variety of Class 1 courses including 20-hour, 36-hour, 40-hour, and the 244-hour courses. Your driving experience and career goals are some things we will discuss to determine the best course for you. The 20 hour courseThe 20 hour course is designed to help drivers with experience get their Class 1 license.

For example, most farmers start driving trucks and machinery at a young age and have a basic understanding of how this equipment operates. They may already be driving large trucks with tandem trailers that are registered as farm trucks but now need to upgrade their license because they are buying a semi tractor-trailer unit.To qualify for this course, drivers must already know how to shift, back and corner properly.

The focus of the course will be on training for the pre-trip inspection, air brake inspection and addressing driving habits. The course consists of training material to study; pre-trip and air brake inspections before practical training starts; use of United’s truck and trailer for training and for the MPI road test; one MPI road test; and professional training by a qualified instructor.

Manitoba Driving Test. This online Manitoba driving test, with multiple choice questions, is intended to help you prepare for the Manitoba Class 5 learner’s license that is required before you can get your driver’s license. This free practice written driving test is a lesson that is essential for getting your Manitoba driver’s license at. Pass Driving Road Test First Time No Critical Errors. I am the owner of Ace It driving school in Winnipeg Manitoba. In this video, I am going to share with you my secrets on how to pass your. To ensure our high standards are met, First Class Training Centre has restricted itself to enrolling only limited numbers of students into our Class 1 Driver Training and Class 3 Driver Training courses. This ensures more one on one learning opportunities to maximize your journey as a professional truck driver.

Training is done in five 4-hour lessons with the fifth lesson consisting of a 2-hour warm up and your MPI test.COST: $2300 (including one MPI road test) The 40 hour courseThe 40 hour course course is designed to help prepare drivers going into the construction, gravel and/or oil industry. Typically, we can help the average driver who has never driven a semi-truck before get their Class 1 license in 40 hours. Understandably, we will never guarantee that 40 hours will be sufficient training to pass MPI’s test.

The 40-hour course includes training on pre-trip and air brake inspections, backing, driving, coupling/uncoupling and log book completion. Training is to industry standards which includes 53-foot loaded trailers. We will take students for their MPI road test on the second last lesson. If a student needs a retest, the final lesson may be used for a retest with the only additional cost being $50 for the MPI test.This course is not designed for long distance or to have a career in the long-distance trucking industry. Do not expect to drive long distance once you have taken this course unless you find a trucking company or an owner-operator willing to provide you extensive on-the-road training, or until after you have gained two years of experience driving locally. The 40-hour course is registered with the Private Vocational Institute which enables you to claim the tuition on your taxes.COST: $3800 (including one MPI road test) The 36 hour courseThe 36 hour course course is designed for drivers with some basic knowledge about operating big trucks or equipment.

The difference between the 36- and the 40-hour course is that drivers with tandem or semi-truck experience may have sufficient knowledge to pass MPI’s road test but will not be issued a T2202A tax receipt so they will not be able to claim the education expense tax rebate. Please check with your accountant. (Employers may be able to claim the full cost of the 36-hour course if paying for an employee to take this course, in which case you may not be concerned about the tax rebate.) We will take students for their MPI road test on the second last lesson.

If a student needs a retest, the final lesson may be used for a retest with the only additional cost being $50 for the MPI test.COST: $3275 (including one MPI road test) The 244 hour courseThe 244 hour course is the Entry-Level Professional Truck Driver Training Program. Elite trucking companies want applicants without experience to take the 244-hour course. United works together with these elite companies to help each graduate find a suitable career in the trucking industry.

This intensive, six-week training course has a strong emphasis on both theoretical and practical training to help drivers succeed in the trucking industry.The curriculum covers over 33 critical components in the trucking industry such as: US/Canada border crossing, Motor Carrier Enforcement, hours of service, coupling/uncoupling, trip planning, shifting, night driving, skid control, mountain driving, etc. This 244-hour course is composed of 80 hours of classroom training, 40 hours of lab time, 60 hours of driving, 60 hours of observing. It includes two paid MPI road tests totaling 4 hours of MPI road test time.Individuals can fund the cost of the course on their own. If you seek funding assistance, please call us to discuss available funding options. If you qualify, funding may be obtained through Manitoba Jobs (MB ETT), Manitoba Metis Federation (MMF), Workers Compensation Board (WCB), and/or First Nations Bands.The 244-hour course is registered with the Private Vocational Institute, enabling you to claim the on your taxes.Please call Anthony at our Steinbach office 204-326-4200 for details.

In the Winkler/Morden area call 204-326-4200 or email Anthony at anthony.thiessen@utdt.ca.COST: $8950 (including two MPI road tests).

Want to learn how to get a Class 3 license in Manitoba? There are lots of interesting driving jobs available if you are willing to explore other Manitoba drivers license options. The Manitoba Class 3 license is a professional drivers license that allows you to drive large industrial trucks and pull trailers. It does not allow you to drive a big rig though.

Winnipeg Manitoba Provincial Nominee

For that, you will need a Class 1 License.Let’s dig into the requirements to get your Manitoba Class 3 License and find out the differences between the Manitoba Drivers Licenses. We also have the MPI Class 3 handbook, location finders and contact information to guide your through the whole process, including How to Get Your Manitoba Class 3 License in 5 Easy Steps. What is a Manitoba Class 3 License?A Manitoba Class 3 License is a professional driver’s license that allows you to drive big trucks and tow things.

A Class 3 License in Manitoba permits you to drive:. A truck with more than 2 axles.

A combination of vehicles that includes a truck with more than two axles (not including a semi-trailer truck). A combination of vehicles consisting of a truck with two axles or Class 5 passenger vehicle, and a towed vehicle with a registered gross vehicle weight of more than 4,540 kgSome examples of vehicles you can drive are large snow plows, dump trucks, mixers and vacuum trucks, roll-off trucks and many other large industrial vehicles. If you hold a Manitoba Class 3 driver’s license you can also drive any vehicles that are included in Classes 4 and 5.Class 3 vehicles are often equipped with air brakes so you should obtain your air brake (A) endorsement and slack adjustment (S) endorsement which can be done at the same time as your Class 3 tests. Slack adjusters are part of your air brakes system in case you are unfamiliar with the term. Don’t worry, the will go over all this information. How do I get a Class 3 License in Manitoba?In order to get a Class 3 license in Manitoba, you must meet certain minimum requirements, pass knowledge and road tests and be in good health.The process to get your Manitoba Class 3 license is administered by Manitoba Public Insurance (MPI). The MPI is a non-profit crown corporation that provides mandatory public auto insurance and administers the licensing process.

There are both MPI Services Centres and independent agents known as AutoPac Agents or Brokers.Let’s show you how to get your Manitoba Class 3 License in 5 Easy Steps. Step 1: Meet the Minimum RequirementsIf you are thinking about getting your Manitoba Class 1 License, you are probably already driving in Manitoba. You must apply to the MPI to get what is called Authorized Instruction so you can learn to drive your Class 3 vehicle. In order to obtain Authorized Instruction, you must:. be at least 18 years old. hold a minimum Class 5 Intermediate Stage or Class 5 Authorized Instruction driver’s license. pass a medical and vision exam.

successfully complete a written knowledge testIf you are coming from another province or country and have a similar license to a Class 3 (meaning you have been driving a truck), you may be able skip many of the steps below. In order to find out if you qualify, give MPI a call at 204-985-7000 or toll-free 1-800-665-2410.An axle is a rod or spindle (either fixed or rotating) passing through the center of a wheel or group of wheels. For example, a passenger car has 2 axles, one in the front and one in the rear. Step 2: Medical Exam and Vision TestYou must be in good physical health and meet the vision standards to get your Class 3 license in Manitoba.

This means that you will have to get a medical examination by a doctor and complete a vision test.If you have concerns about your hearing, vision or general physical or mental health, you should contact MPI Driver Fitness to discuss any disability or restriction you may have. The phone numbers are listed in the section of this article.You should get your medical examination first, then do your vision test when you go to write your knowledge tests. Medical ExaminationThe medical examination is done at your doctor’s office and the report is filed with MPI. Manitoba Health does not pay for this and your doctor will likely charge you a fee.You can get your medical examination after your knowledge test but you should probably do it first so you know you are good to go health-wise before doing the knowledge test. The medical examination is valid for 6 months so you have to get your learner’s license within this time frame. Vision TestThere are minimum vision standards to operate a Class 3 vehicle but glasses or contacts are fine to correct any issues. The standards are:. Vision acuity no less than 6/9 with both eyes open and examined together with the worse eye no less than 6/30.

Visual fields must not be less than 150° with both eyes open and examined together.If you wear contacts, you always have to have your glasses in the truck with you just in case you need to remove a lens. Make sure to bring your glasses to all your tests. Step 3: Class 3 Knowledge Tests in ManitobaThere are two tests that you will need to complete:. Air Brake Knowledge Test. Class 3 License Knowledge TestAlthough you do not have to get your air brakes endorsement for a Class 3 License, many large trucks are equipped with them and we believe, given the relatively low cost and effort, it is worth it in the long run. Most training programs include air brake instruction anyways.These written closed book test must be scheduled ahead of time with an AutoPac agent or at an MPI Service centre.

Use this feature to near you. The test can be scheduled up to 8 weeks in advance in either English or French.If you fail a test, you will have to wait until the next business day and pay the fee again which is $10 per test attempt.Once you have completed the tests (and assuming you already submitted the medical examination), you will be issued a learner’s license so you can start practicing your driving skills.Make sure you study for these tests. You can do this by reviewing the Professional Driver’s Manual, Air Brake Manual and try a practice quiz online. Find them all at the end of this article in our section.Make sure you are familiar with the information on Class 4 vehicles of the Professional Driver’s Guide. Even though you may just want to drive a truck, a Class 3 license let’s you drive Class 4 vehicles like a small bus or taxi so you will be tested on that content too. Step 4: Class 3 Training in ManitobaThere is no official requirement to complete formal training or driving lessons, however we recommend that you do some.

Not only will help you sharpen your skills for the road test but it will keep everyone (including you) safe on the road and looks great on the resume when applying for jobs.If you know someone with a truck, you can practice with them. They must have had their Class 5F license for at least 3 years and their Class 3 license for at least 2 years. In the alternative, you may want to take some lessons or sign up with a school for a training package. Formal Training Schools & LessonsIf you do not have any formal training it may be very difficult to convince a company to hire you.

This is why we recommend getting some training.You can get hourly lessons up to 24 hour (part-time) packages. We recommend taking a training package that includes an air brake component and a vehicle rental for your road tests. The most common for new drivers is the 24 hour package that includes everything from in-class and on the road instruction, pre-trip and air brake inspections and truck rental for the road tests.There are various training packages and schools out there. Be sure to shop around and pick a program that suits your financial and driving needs.

Step 5: Class 3 Road Test in ManitobaBefore you try the Class 3 road test in Manitoba, MPI requires that you:. wait at least 2 full weeks since you obtained your Authorized Instruction. possess your full (F) Class 5 driver’s licenseRoad Test LocationsNot every city offers Class 3 road tests. The following are the locations that road tests are available:. Winnipeg (including the municipalities of Headingley, East and West St. Paul). Beausejour.

Brandon. Dauphin. Portage la Prairie. Steinbach. Thompson. WinklerYou must take your road test at the location near you.

You can by selecting broker under services and selecting one of the above cities that is closest to you. Remember you have to schedule the test ahead of time. The VehicleYou are required to provide your own Class 3 vehicle, equipped with air brakes if you are getting that endorsement too. The vehicle must be in good working condition. You will also have to provide a Vehicle Registration Certificate to show the truck is insured and registered.Assuming you don’t have your own truck, which is probably almost all of you, you have a couple options. The most practical is that most schools that you do Class 3 training with offer a truck to you for your test as part of the training package. If they don’t or you didn’t do any training, you may be able to rent one from these schools or another provider.

Of course, you can always borrow one from a family member or friend that may be in the industry. The Road TestYou must arrive 15 minutes before your test starts. You will be required to do a pre-trip inspection of the vehicle and an actual driving test. The driving part of the test is used to evaluate your driving skills and test your ability to operate a Class 3 vehicle in a safe and legal manner. The cost of the Class 3 road test is $45.You must successfully complete the pre-inspection test before moving on to the driving part of the test. If you fail you can try again the next business day. The Air Brake TestAssuming you are going for our air brake endorsement, you will pre-inspection of your air brakes system to to get your A (and S) endorsements.

The air brake test is comprised of two parts:. a practical demonstration of a pre-trip brake inspection along with a verbal explanation of the air brake components and their functions. a demonstration that shows you can adjust a manual slack (this is for your S endorsement)This test can be done at the same time as your Class 3 road test and is free. If you do this test separately, the cost is $30.Make sure you have the right tools and equipment to do a brake adjustment during the air-brake pre-inspection test. The Air Brake Manual gives information on air brake system inspection and adjustment found below in our section. Manitoba Class 3 License: CostsNow that you know what a Manitoba Class 3 license is and how to get it, let’s go over the costs.

In this estimate, we are assuming that you have no professional driving, take a training program and obtain your A/S endorsement. Contacts, Forms and ResourcesHere are some helpful contacts to ask general questions or obtain testing centre locations. Manitoba Public Insurance Contact InformationPhone NumbersIn Winnipeg: 204-985-7000Outside Winnipeg (and outside Manitoba): Toll-free at 1-800-665-2410Contact Centre Hours of Operation. Monday to Friday – 7:30 a.m. To 7 p.m. Saturday – 8:30 a.m.

To 4 p.m. Sunday – ClosedMailing AddressManitoba Public InsuranceBox 6300Winnipeg, MB R3C 4A4Delivery AddressManitoba Public InsuranceBox 6300Room B100, 234 Donald StreetWinnipeg, MB R3C 4A4 MPI – Driver FitnessUse these phone numbers to inquire about your medical fitness to obtain a Class 3 license.Phone Number: 204–985–1900Toll-free: 1–866–617–6676 Manitoba Trucking Association25 Bunting StreetWinnipeg, Manitoba R2X 2P5Phone Number: 204–632–6600 Resources.